Light inspection machine
The light inspection machine can be used as a reference for specific models in the light inspection machine series. This page organizes model positioning, parameter information and supporting suggestions based on public product information to facilitate preliminary selection and page jumps.
Model positioning
- Series: Light inspection machine series
- Parameter overview entrance: Filling and packaging equipment parameter library
- Applicable scenarios: Suitable for transparent glass bottles and high value-added liquid packaging projects.
Summary of public information
It realizes the fully automatic inspection method of entering the bottle - clamping the bottle - turning the bottle - picking the bottle - removing the bottle.
Disclosure points
- It realizes the fully automatic inspection method of entering the bottle - clamping the bottle - turning the bottle - picking the bottle - removing the bottle.
- Adopt inverted inspection, which allows foreign matter in the bottle to fall through inversion to improve the quality of inspection.
- The viewing angle is large, with a viewing angle greater than 100°, allowing ample time for inspection and comparison, with high accuracy. There is no obstruction by the outer ring track after the bottle is turned over, making the line of sight clearer.
- The pressure heads of the static arm and the moving arm of the movable chuck can be rotated. The pressure heads have little wear and will not damage bottles or caps.
- LED light source, using LED light source close to natural light, has low energy consumption, high efficiency, no flicker, no radiation, protects eyes, and does not cause fatigue when working for a long time.
- The nylon jaws are processed by the profiling method and are made according to the unused bottle mouth. The clamping is firm and the bottle cap is not easily damaged.
Supporting suggestions
- First look at the series page: Light inspection machine series
- Look at the parameter overview again: The position of the light inspection machine in the parameter library
- If it is a complete line project, you can continue to view Filling Package Overview and Production Line Overview.