Plan a complete production line
Match cleaning, crushing, roasting, pressing, filtering and filling equipment.
Open pageAutomatic Case Erector and Carton Packing Machine
This equipment family prepares flat corrugated blanks for downstream packing by opening and forming the carton, with the offered bottom-closing and product-loading scope defined project by project. Buyers should distinguish clearly between a case erector, a product packer and a combined cell when comparing quotations.
Application and purchasing fit
- Product family: Packing and palletizing solutions
- Parameter reference: Filling and packaging equipment parameter library
- Confirm which actions are included: blank magazine, carton opening, bottom folding, tape or hot-melt closure, product loading and discharge.
- Check the carton blank quality and dimensional tolerance because poor creasing or warped blanks can affect reliable forming.
- Coordinate the cell with product grouping, carton sealing and palletizing rather than treating each station as an isolated machine.
Published reference parameters
The following table is retained as the published model reference. Final performance and compatibility must be confirmed in the written quotation and acceptance specification.
| Power | Air pressure | Tape width (cm) | Molding speed | Tape length | with hot melt adhesive machine | Carton specifications | Dimensions (mm) | Machine weight (kg) |
|---|---|---|---|---|---|---|---|---|
| Single phase 220V, 50Hz/60Hz, 600w | 6kg/cm² | 4.8-6.0 | 12 boxes/minute | ≤2000m | Can be matched with any brand of machine | L 550 W400 H 400 | L200, W150, H100 | About 400 |
| 380V, 50Hz, 2.5KW | 4-8kg/cm² | 4.8-7.2 | 20~60 boxes/minute (according to specifications) | ≤2000m | L 150~506 W 150~405 H 102~405 | L3000, W2000, H1700 | About 850 |
What to provide for a manufacturer quotation
- Carton blank drawings and samples, board grade, crease direction, size range and bottom-closure method.
- Product dimensions, weight, orientation, grouping pattern and whether robotic or mechanical loading is required.
- Target cycle rate, magazine autonomy requirement, conveyor elevations and available layout.
- Hot-melt or tape specification, utility conditions, guarding, FAT protocol and included change parts.
Use representative samples for the factory acceptance test whenever practical. The agreed test material, run duration, sampling method and pass limits should be written into the purchase specification.
Price, delivery, and written service scope
Manufacturer pricing depends on the confirmed machine configuration, format parts, controls, guarding, line interfaces, utilities and destination. Delivery schedule, export packing, installation, commissioning, training, spare parts and after-sales support apply only as stated in the written quotation and contract.