Plan a complete production line
Match cleaning, crushing, roasting, pressing, filtering and filling equipment.
Open pageCO2 Laser Coding Machine
A CO2 laser coding machine creates permanent production, batch or traceability marks on compatible non-metal packaging surfaces. Mark contrast and readability depend strongly on the substrate, coating, line speed and optical setup, so sample marking is the main selection step.
Application and purchasing fit
- Product family: Laser coding machine series
- Parameter reference: Filling and packaging equipment parameter library
- Use CO2 technology only after testing the actual label, film, carton, coated surface or container material.
- Confirm the marking field, character height, content changes and trigger arrangement for the moving product.
- Include guarding, interlocks and fume extraction in the line review rather than treating the laser source alone as a complete station.
Published reference parameters
The following table is retained as the published model reference. Final performance and compatibility must be confirmed in the written quotation and acceptance specification.
| Product model | CX10 | CX30 | |
|---|---|---|---|
| Laser parameters | Laser | Sealed RF excitation imported from the United States CO2 Laser | |
| Laser wavelength | 10.6 or 10.2 μm | ||
| Average output power | 10W | 30W | |
| Modulation frequency range | 5kHz-20kHz | 5kHz-20kHz | |
| Galvanometer parameters | Maximum speed | 7000mm/s | |
| Resolution | 0.001mm | ||
| Repeat positioning accuracy | 0.003mm | ||
| Optical output characteristics | Marking range | F=160mm, range 110×110 (optional) | F=160mm, range 110×110 (optional) |
| Minimum line width | 0.1mm | 0.1mm | |
| Minimum character height | 0.4mm | 0.4mm | |
| System property | Laser power supply | AC220V/50Hz | AC220V/50Hz |
| Device input maximum power | 0.8KW | 1.1KW | |
| Device input average power | 0.5KW | 0.7KW | |
| Cooling method | Air-cooled | Air-cooled | |
| Host system dimensions | |||
| Workbench travel | 600mm | ||
| Environmental requirements | 0-35℃, humidity<90% |
What to provide for a manufacturer quotation
- Production samples for every substrate and color, plus the required mark content and minimum readable size.
- Line speed, product pitch, marking position, available working distance and encoder or sensor arrangement.
- Required laser source configuration, cooling, electrical supply, enclosure and extraction conditions.
- Sample-mark acceptance, code verification method, software interface, spare parts and commissioning scope.
Use representative samples for the factory acceptance test whenever practical. The agreed test material, run duration, sampling method and pass limits should be written into the purchase specification.
Price, delivery, and written service scope
Manufacturer pricing depends on the confirmed machine configuration, format parts, controls, guarding, line interfaces, utilities and destination. Delivery schedule, export packing, installation, commissioning, training, spare parts and after-sales support apply only as stated in the written quotation and contract.