Compare machine models
Check hot-press, cold-press and small-shop models by batch capacity.
Open pageHow to Choose an Oil Press Machine by Raw Material
Published: June 12, 2026Category: Technical Knowledge
Many buying questions sound like machine questions, but they are really process questions. Before choosing a press model, buyers should first ask what their raw material needs. Once raw material is clear, model choice, daily batch planning, filtration, and packaging decisions become much more accurate.
Start by classifying the raw material
A simple way to think about oilseeds is to divide them into three groups. First are premium-value materials such as sesame, walnut, flaxseed, pumpkin seed, and grape seed, where product quality often matters more than bulk output. Second are flexible materials such as peanut, tea seed, sunflower, and rapeseed, which can support either mainstream or premium positioning. Third are materials that often need stronger system planning, such as soybean and other larger-scale process routes.
Raw material affects hot press or cold press choice
Sesame and peanut projects often care a lot about aroma, so hot press is common. Walnut, flaxseed, and pumpkin seed are more often positioned as premium oils, so cold press is more common. Tea seed oil and sunflower oil can go either way depending on whether the market values higher efficiency or higher-end positioning.
Model selection should follow material difficulty
Harder materials, stronger cold press requirements, and tighter product standards usually justify a higher-level hydraulic model. The 300 and 325 series fit many hot press startup projects. The 355 to 500 series are often a better match for stable cold press, premium seeds, or projects with stricter long-term production demands.
Support equipment should also match the raw material
Sesame and peanut often need stronger cleaning, shelling, or roasting support. Tea seed and rapeseed depend more on stable pretreatment. Soybean projects usually require more systematic thinking around pretreatment, pressing, and later filtration or refining. Sunflower projects may also need closer attention on shelling ratio and dewaxing requirements.
Four questions worth answering before asking for a quote
- What raw material will you process, and is it hulled or unhulled?
- Do you want hot press or cold press?
- Will you sell bulk oil, bottled oil, or premium gift oil?
- How many batches per day do you plan to run, and will you expand later?
With these points clear, machine recommendations become much more useful.
Conclusion
Choosing an oil press machine by raw material is really about matching the process, not just comparing model numbers. The more clearly the raw material and product route are defined, the lower the risk of wrong equipment decisions later.